10
www.bitrek.com.ua
[email protected]
+380 44 507 02 07
Table 3 - LEDs status
LED status
Red
Green
Lights up constantly
Connected to the
server and transferring
data
Satellites locked,
coordinates
determined
Not glow
-
No GPS signal
Blinks every 0.5 sec.
Not connected
-
Blinks every 0.2
seconds
Not connected, GSM
modem is in sleep
mode
-
Adjustment of "BI-868 TREK HW2" device
Basic information
The tracking device "BI-868 TREK HW2" can be configured in
following ways:
1.
With a direct connection of the device to a computer.
2.
Remotely, using SMS commands.
3.
Remotely, using the configuration server.
Setting of the device through any of the available methods is limited
with the setting of the required values of the device parameters. Each
parameter has its own unique ID. Special commands are used to
read/record the values of selected parameter.
At remote configuration via SMS take into consideration that the
total length of the SMS shall not exceed 160 Latin characters. Number of
commands in SMS is limited to a maximum length of SMS.
All commands for the device are divided into control and
information commands.