13
www.bitrek.com.ua
[email protected]
+380 44 507 02 07
«DL1: 1 DL2: 0 DO1: 0 VPSV: 12996mV VBAT: 4290mV AIN1: 37mV
AIN2: 38mV»
, where:
DL1: 1 DL2:0
– current state of the discrete inputs;
DO1: 0
– current state of the discrete output;
VPSV
– external power supply, millivolts;
VBAT
– power supply of device accumulator battery, millivolts;
AIN1: 37mV AIN2: 38mV
– analog inputs voltage, millivolts.
Request of device profile parameters.
Command to be send –
flush;
Example of response:
«xxxxxxxxxxxxxxx, gps.utel.ua, none, none, xxx.xxx.xxx.xxx, xxxxx 0»
, where:
IMEI (xxxxxxxxxxxxxxx)
– identification number (IMEI) of the device;
APN (gps.utel.ua) –
access point for GPRS connection (to be specified by
the operator);
Login (none) –
access login to GPRS (to be specified by the operator,
usually, it is not required);
Password (none) –
access password to GPRS (to be specified by the
operator, usually, it is not required);
IP (xxx.xxx.xxx.xxx)
– Server IP address for data transmission;
PORT (xxxxx
) – PORT of server for data transmission;
MODE (0
) – mode of device operation (0 – TCP/IP connection).
Read the value of the parameter by its ID
Command to be send –
getparam ####;
Parameter ID (####) consists of four digits and indicates the number of
the parameter. All configurable parameters are specified in the list of
Example of response:
«Param ID #### Val: #»
, where:
Param ID
– ID of requested parameters;
Val
– current value of parameter.
Example of the command to request APN of the device (a parameter that
contains the APN device has ID 0242) –
getparam 0242;
Example of response:
«Param ID 0242 Val: gps.utel.ua».
