w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
A
ssembly
you need: phillips head screwdriver.
Attach handle to vacuum
1.
Locate handle and lower cord wrap.
Remove screw packet (3 screws total)
from back of handle.
2.
Slide the base of the handle firmly into
the grooves at the top of the vacuum
body.
3.
iMpoRtant
– Before inserting the
screws into the handle, slide the lower
cord wrap into the handle. Continue to
push firmly until the handle and cord
wrap are flush.
4.
Insert 2 of the screws and tighten secure-
ly to attach lower cord wrap and handle
to body of vacuum.
5.
Attach the upper hose and cord clip by
snapping it into the handle of the unit.
Secure it by inserting screw provided.
6.
Attach the lower hose clip by snapping
into place and twisting to the right.
Attach vacuum hose and tools
1.
Line up tabs on the base of the Twist
‘n Snap hose with the corresponding
notches on the hose collar. Turn the hose
to the left to lock into place.
2.
Grasp the curved hose wand; slide the
end of the curved hose wand onto hose
wand base. Snap the hose into the hose
clip.
3.
Slide the extension wand and crevice
tool together into storage clip.
4.
Attach the TurboBrush by lining up with
base of holder in handle and push back
to snap into place.
5
2.
2.
6.
5.
2.
3.
1.
Curved
Hose
Wand
4.
3.
4.
Insert Screw
Insert Screw
DJ68-00375N(EN)-0.0.indd 5
10. 11. 12 �� 4:23
