Tools
attach desired tool to hose for above
floor cleaning surfaces or hard to
reach areas.
1.
Remove Hose: With vacuum in upright
position, separate curved hose from
hose base.
2.
Attach tools by firmly pushing onto
vacuum hose or extension wand.
a. dusting brush/upholstery
tool:
Use brush side to dust furniture,
blinds, lamps, shelves, and baseboards.
Slide brush off to use upholstery tool on
cushions, draperies, and fabrics.
b. crevice tool:
Use in tight narrow
spaces.
c. extension Wand:
Use with
desired attachment for longer
reach.
d. curved hose Wand:
Use with
desired attachment for a longer
reach.
note:curved hose Wand
must be installed while using
machine in upright position.
e. turbobrush
®
tool:
Use rotation
brush action for small flat areas
such as stairs and cushions. Press
gently down and pull towards you
in raking motion, too much pres-
sure will cause brush to stop
rotating.
Clean Filter Indicator
the indicator tells you when the air flow
in your vacuum is reduced due to dirty
filters or a clog in the hose. the indica-
tor will remain green until the air flow
is reduced – and then will change to red
or black. When fully red, the airflow is
greatly reduced or clogged by a dirty
filter. When fully red, follow instructions
on page 8 to clean/replace your filters. if
indicator turns black, follow instructions
on page 11 to check for and clear clogs.
note: When vacuum is off, the
clean filter indicator will turn red.
the indicator only detects reduc-
tions in airflow when the vacuum
power is on.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
7
O
perations
Clean Filter
Indicator
1.
DJ68-00375N(EN)-0.0.indd 7
10. 11. 12 �� 4:23
