w w w. b i s s e l l . c o m
7
o
perations
ATTENTION:
Some Berber carpets have a tendency to
fuzz with wear. Repeated strokes in the
same area with an ordinary vacuum or
deep cleaner may aggravate this condition.
Before you clean
1.
Plan activities to give your carpet time to dry.
2.
Move furniture
to another area if
cleaning an entire room (optional).
3.
Vacuum area with a dry vacuum
cleaner before deep cleaning.
4.
Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.
5.
Pretreating
(optional)
Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entry
ways and hallways.
To pretreat:
A.
Using the BISSELL Tough Stain
Precleaner, generously spray evenly
over soiled area, do not overwet.
B.
Wait 3-5 minutes before deep
cleaning.
C.
Clean as normal using your BISSELL
deep cleaner, following the
instructions below.
Fill the 2-in-1 water tank
1.
Remove the tank from the base of the
machine by lifting the tank carry handle.
2.
Carry like a bucket to the sink. Rotate
the handle forward to unlatch the lid.
Remove lid, turn over and locate built in
measuring cup.
3
.
Fill with BISSELL 2X formula to the
indicated fill line on the built in
measuring cup and pour into mouth
of the bladder.
4.
Fill the bladder with clean hand hot
tap water.
*Do not boil or microwave
water as it can destroy the
bladder.
2
4'
3'
1
3
4
5
6
7
9
10
11
12
EXIT
START
HERE
1.
2.
4
3.
