w w w. b i s s e l l . c o m
o
perations
8
Fill the 2-in-1 water tank (cont)
Empty the 2-in-1 water tank/clean removable nozzle
5.
Replace the top of the tank by matching
the lid and tank edges. Handle must
be in the forward position in order to
replace lid. Rotate the handle to the
carrying position to latch the lid.
Note: Remember to secure the lid
and test to make sure it is secure
before picking up the tank.
6.
Place tank into machine base, seating
firmly in place. Rotate tank handle back
into latched position.
Carpet cleaning
1.
Plug the deep cleaner into a proper
outlet. Turn the power ON by press-
ing the red power switch on the back
of the unit with your foot.
2.
With your foot, press the gray handle
release lever located on the back of
unit below water tank.
3.
While pressing the spray trigger,
make one slow forward wet pass
and another back. Let the BISSELL 2X
deep cleaning formula and DirtLifter
PowerBrush do the work for you.
Caution: Do not overwet.
4.
Release the spray trigger and make
one slow forward and backward pass
over the same area to remove any
residual dirty water and aid in drying.
5.
Repeat cleaning passes until solu-
tion being pulled up appears clean.
Continue passes without pressing the
spray trigger until you can’t see any
more water being suctioned up.
1.
Turn power switch OFF. Remove the 2-in-1
water tank from the base using the tank
carry handle. Carry the tank like a bucket
to a utility sink or outside where you will
dispose of the collection water. Remove the
top of the tank by rotating the handle for-
ward to unlatch lid and lifting lid off tank.
Tip:
Thorough vacuuming
before deep cleaning will
prevent early clogging of
the lint trap.
WARNING:
To reduce the risk of fire and electric
shock due to internal component
damage, use only BISSELL cleaning
formulas intended for use with the
deep cleaner. Non-BISSELL cleaning
formulas may harm the machine and
void the warranty.
6.
5.
Handle Release
Power Switch
1.
