Bissell HYDROCLEAN COMPACT 1991 Series, User Manual

Page: 14 / 40

www.BISSELL.com
14
Wet Cleaning: Hard Floors
Tips Before Wet Cleaning
WARNING
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning formula intended for use with this cleaner.
Non-BISSELL cleaning formula may harm the machine and void the guarantee.
• Plan activities to give hard floor time to dry.
• Thoroughly dry vacuum area to be cleaned
• Plan your cleaning route to leave an exit path. It is best to begin cleaning
in the corner farthest from your exit.
1 2
3
Connect the hard
floor attachment
to bottom of wet
clean floor tool by
pushing in button
on side of tool
with one hand and
with other hand
slide hard floor
attachment down
over the straight
top groove.
4
When hard floor
attachment is in
correct position,
release button to lock
into place.
Important: Make sure grooves on
squeegee are pointing down.
To wet clean sealed
hard floors, slide
squeegee insert into
channel of hard floor
attachment by inserting
end with two arrows on
squeege in first.
WARNING
To reduce the risk of fire and electric shock, always install
float before any operation.
WARNING
Do not operate cleaner without all filters in place.
IMPORTANT! Be sure to follow instructions for Assembly and Filling Your Tank for
Wet Clean Mode before wet cleaning hard floors.
To mop sealed hard
floors, place mop pad
evenly on white Velcro
strip on mopping insert
and slide full attachment
into channel of hard
floor attachment.
Important: Be sure
top of mop pad is
positioned below lip on
mopping insert.