Bissell HYDROCLEAN COMPACT 1991 Series, User Manual

Page: 13 / 40

www.BISSELL.com
13
Wet Cleaning: Carpet & Upholstery
5
6
For carpet cleaning,
attach wet clean
floor tool to end of
extension wand and
attach solution hose
to grip connector.
ATTENTION
Do not over wet carpet.
IMPORTANT
If using in wet clean mode to clean upholstery, be sure to check
manufacturer’s tags before cleaning: “W” or “WS” on the tag means you can
use your cleaner. If the tag is coded with an “X” or “S” (with a diagonal stripe
through it,) or says “Dry Clean Only,” do not proceed with wet cleaning. Do
not use on velvet or silk. If manufacturer’s tag is missing or not coded, check
with furniture manufacturer or dealer.
4
HELPFUL TIP
If cleaner loses suction, stop wet cleaning and check collection tank as
suction will shut off when float inside collection tank reaches full level. If
cleaner stops spraying, immediately press power button off and check
solution tank level.
For upholstery
cleaning, attach wet
clean upholstery tool
directly to grip and
attach solution hose
to grip connector.
Place wet clean floor tool directly
on carpet and press spray trigger to
spray cleaning solution while pulling
tool back towards you. Release spray
trigger and make slow backward dry
passes over the same area to remove
any residual water. Continue to clean
entire surface until no more dirt can be
removed.
Attach the wet clean
soft surface tool
adapter directly to grip.
Attach solution hose
to grip connector and
attach cleaning tool to
end of adapter.
For cleaning with other BISSELL
soft surface cleaning tools
available for purchase: