Birmingham WSG1640AHD, Operating Manual

Page: 42 / 85

Operating Manual
34
Press F4, HMI will show above menu, press arrow
↑、↓
to turn page,
press “ENTER”, the fist data will shining, the feed times can be set by
press arrow
↑、↓
to increase or decrease times. Pressing “ENTER” to
confirm the data and then the second data shining, repeat the same
operating step to set the grinding times. And press “ ENTER” to confirm
until all the data was set. Then press F16 to make the data setting
effective.
Press “ENTER” directly without data reset, the cursor will move to
next data
Press “ESC” key, the date will be reset, and then press “ ENTER”, the
cursor will move to first data.
Program stop and cancel
while the autodown feed program is going, stop the working table by
speed control lever , the table and wheel head move stop, restart the
workig table longitudinal moving, the program resatart too.
While the autodown feed program is going, turn the knob SA4 to “jog
feed” position, the program is stop, and then the operator can
make grinding head down feed by SB6 , and if turn SA4 to “auto down