Birmingham WSG1640AHD, Operating Manual

Page: 37 / 85

Operating Manual
29
make rapid up moving.
Note:
the when the machine is set on “ Jog-feed “ function, the
elevating Servo motor will be “ power on”,
IT IS FORBIDED MOVING
THE WHEEL HEAD BY MANUAL (HAND WHEEL) !
3. Auto feed
Turn the SA4 to “ auto feed “ position, the wheel head will make
auto down feed, this function have two mode: “Surface grinding” or
“Plunge grinding” mode ( select by F3 and F7)
Note:
the when the machine is set on “ auto feed “ function, the
lifting Servo motor will be “ power on”,
IT IS FORBIDED MOVING THE
WHEEL HEAD BY MANUAL (HAND WHEEL) !
”SURFACE GRINDING” mode operating instruction
push F11 and select Surface grinding mode
, turn SA4 to rapid feed
position
→
set feed rate and feed times by HMI
F8
F7 F5 F6
F4 F3 F2 F1
F16 F15 F14 F13
F12 F11 F10 F9
ESC
ENTER SHIFT
TD400C SIEMENS
→
set
spark out feed by HMI
F8 F7 F5 F6
F4 F3 F2
F1
F16 F15 F14 F13
F12 F11 F10 F9
ESC
ENTER SHIFT
TD400C SIEMENS
→
start the oil pump
→
turn the table
speed control lever make the table longitudinal moving
→
start the
wheel head spindle
→
move the saddle and spindle head to the start
working position
→
turn the SA4 to Auto feed
→
push SB6
then the
auto feed is start,
the wheel head will make first down feed as
soon as the saddle inversing, until finish all steps down feed, then the