BiowavePRO
®
User’s Manual
Biowave Corporation
30
4.6.1.3 Placement for Sacroiliac
(SI) Joint Pain
Use the B-set:
Both electrodes
may be placed bilaterally over the
sacroiliac joint covering one or two
pain sites (unilateral or bilateral SI
joint pain). Make sure there is at
least 1.0 inch of space between the
electrodes (see photo to the right).
Body Position:
The torso should be
approximately at a right angle to the
legs causing the tissue in the lower
back and buttocks to be more taut.
4.6.1.4 Placement for Pain
Centered Over the Spine
Use the B-set:
Both electrodes may
be placed in a vertical arrangement
directly over the spine covering a
primary pain site or multiple pain
sites. For example, if the primary
pain site is located at L3, then one
round electrode should be placed
over L3. The comfortable bony
prominence location for the second
electrode would be approximately
over L5, directly beneath the first
electrode. Make sure there is at
least 1.0 inch of space between the
electrodes (see photo to the right).
If the primary pain site is located,
for example, at S1, then one round
electrode should be placed over
S1. The comfortable bony prominence location for the second electrode
would be above the first electrode located approximately over L4.
Body Position:
The torso should be approximately at a right angle to the legs
causing the tissue in the lower back and buttocks to be more taut. Therefore the