BiowavePRO
®
User’s Manual
Biowave Corporation
98
8.4.2 PAUSE TREATMENT MID-PROCEDURE
Press the Power Button once to turn the
intensity off and pause the treatment. A
Pause symbol will appear as shown in the
LCD display to the right.
Electrode placement, for example, can now
be readjusted if desired, or the leadwire cable can be unplugged from the
stimulator to allow a patient to go to the bathroom or to attend to some
other need.
To restart the treatment, press the PLUS (+) button to manually increase the
intensity from zero back up to a therapeutic level.
8.4.3 CHANGE CONTRAST OF LCD DISPLAY
Contrast
can only be changed
while the battery is charging, while the LCD
reads 0.0%, or during mid treatment. The contrast cannot be adjusted if an
error condition appears on the LCD display.
Changing the contrast mid treatment will not interrupt the treatment.
Should the contrast of the LCD display need to be
adjusted, the user can adjust the contrast as follows:
To Increase the Contrast:
Hold down the OK Button while pressing the
PLUS (+) Button multiple times to increase the
contrast.
To Decrease the Contrast:
Hold down the OK Button while pressing the
MINUS (–) Button multiple times to decrease the
contrast.