Page 3
Section 1
System Requirements and Wiring
BioTector Network Control Unit operates with BioTector proprietary software “BioTector
OS3” (Operating System 3). This software and all associated copyright is the sole
property of BioTector Analytical Systems Ltd. Purchase of the BioTector analyzer built
with a Network Control Unit licenses the user to use the BioTector OS3 software as
configured and for the purpose of operating the BioTector during the life of the specific
analyzer.
1.1 Prerequisites
An Ethernet port on site to connect the BioTector Network Control Unit (BNCU)
to your network.
If longer than 10 meters Ethernet cable is required, additional Ethernet cable
may need to be sourced locally.
1.2 Introduction
The BioTector Network Control Unit, which is installed on the motherboard (behind the
LCD screen), is shipped preconfigured from the factory.
The unit typically contains the following parts:
TS7800 Single board computer (BNCU) containing power & serial
communication cable.
2 meters of internal Ethernet CAT6 cable.
10 meters of external Ethernet cable with electrical gland.
Optional: Waterproof Ethernet connector.
