Page 10
Section 3
Introduction
This user manual provides information on the use of the BioTector Network Control
Unit (BNCU). The BNCU allows you to monitor and control your BioTector analyzer
remotely through a web browser on a network. In this section the following information
is presented:
How to use the web site
Logging In and Out
Navigating the web site
3.1 How to use the web site
To use the web site, you need the following items:
An Internet connection
▪
Ensure there are no firewalls or security software that may prevent you
from accessing the device. (Your IT department staff should be able to
help you with any issues.)
Web browser
▪
It is recommended that you use the latest version of Mozilla Firefox
1
or
Google Chrome
2
. Also you should ensure that JavaScript is enabled in
your browser. The system should work on any modern Operating
System.
Username and password
▪
The BNCU web interface has three users, each with different privileges:
“admin”
,
“user”
and
“guest”
.
The default passwords for these are
“admin”
,
“user”
and
“guest”
respectively
.
Web site address
▪
The default network configuration of the device is as follows:
◦
IP address: 192.168.168.252
◦
Subnet mask: 255.255.255.0
◦
Gateway: 192.168.168.1
1
http://www.mozilla.com
2
http://www.google.com/chrome
