6
Using the Floor Scale & Remote Unit Together
The floor unit is fitted with sensors that can measure body
fat %, body water %, body muscle % and the number of calories
you should consume each day to maintain current weight. When
the floor scale and remote unit are used together, you do not
need to enter your weight when entering your other coordinates
into the remote.
1. Press the
ON/OFF
button once on the remote unit.
2. Press the
SET
button to enter the setting mode. The user
number will start to flash. Press the
UP
or
DOWN
button to
select your user number.
3. Press the
SET
button to confirm.
4. The unit of weight will begin flashing. Press the
UP
or
DOWN
button to change to st, Ibs or kg.
5. Press the
SET
button to confirm. The gender symbol will
begin to flash.
6. Press the
UP
or
DOWN
button to select your gender.
7. Press the
SET
button to confirm. The height value will begin to flash.
8. Press the
UP
or
DOWN
button to choose your height.
9. Press the
SET
button to confirm. The age value will begin to flash.
10. Press the
UP
or
DOWN
button to choose your correct age.
11. Press the
SET
button to confirm. The weight value will
begin to flash.
12. Once the weight value starts to flash on the remote
unit, make sure your fingers are pressed securely on the
electrodes on the remote, tap the floor scale and stand on
with bare feet.
13. Both displays will show ‘
0.0
’ first and then ‘
----
‘. Several
seconds later your weight will be shown on the floor scale
and then on the remote unit, after a few seconds.
14. Keep standing on the floor scale with your hand extended in front of you
holding the sides of the remote. Your body fat %, body water %, body muscle
% and the number of calories you should consume each day to maintain
current weight, will be measured and then displayed on the remote.
kg
kg
cm
kg
Age
cm
kg
Age
cm
M
Kcal
kg
F
W
kg
kg
