7
15. The remote and floor scale will change back to normal display
automatically after 20 seconds.
Reviewing Your Past Measurements
1. Press the
ON/OFF
button once on the remote unit.
“
1-10
” will start to flash.
2. Press the
SET
button and hold it until ‘
LLLL
’ appears.
Release the
SET
button and the user number will flash.
3. Press the
UP
or
DOWN
button to select user number.
4. Press the
SET
button to confirm.
NOTE:
The last measured data of the user will be displayed
along with the time and date of the measurement. If the
user does not have any measured data, it will show ‘
0
’ and
return to normal display.
5. To review other data press the
UP
or
DOWN
buttons.
NOTE:
After the results have been displayed 3 times, the
remote unit will automatically default back to normal display.
Error Information
The floor scale
Low battery
Weight overload
Weight error
The remote unit
Low battery
Weight overload
Weight error
kg
M
Kcal
kg
F
W
