3
• Weighing:
1. You can use the floor scale only
2. You can use the floor scale and remote unit together
• Body fat, water and muscle percentage:
1. You can use the remote unit only
2. You can use the floor scale and remote unit together
Using the Floor Scale Only
Located on the back of the floor scale is a switch. The upper setting is “st”
(stones), the middle setting is “lbs” and the last setting is “kg”. Move the
switch to your preferred unit of measurement.
Weight Measurement Using Floor Scale Only
1. Gently using your foot, tap the center of the
floor scale. The display will show “
8888
”
and then “
0.0
”.
2. Once the screen shows “
0.0
”, stand on the
floor unit with both feet. You will see a dotted
line and then your weight will be displayed
for approximately 10 seconds.
NOTE:
If you remain on the scale for longer than 10 seconds the scale will
flash “ERR” and automatically shut off. If this occurs step off the scale and
repeat steps 1 and 2.
Understanding your Remote Unit
lb
Am
St
M
Pm
Kcal
kg
Age
F
W
cm
ON/OFF
ON/OFF
- switches the unit between
measuring and normal mode.
SET
- confirms data entry and turns the
backlight on and off.
UP
- increases the displayed data
during data entry.
DOWN
- decreases the displayed data
during data entry.
kg
kg
