Bioreba HOMEX 7, User Manual, Page: 6 / 25

6
HOMEX 7 – User Guide
Fig. 2 Fig. 3
Fig. 4 Fig. 5
5.1 Replacing the rack
In order to replace the rack, you need to push the knobs (Fig. 6) at the two fixing screws and pull the screws out. In-
sert the new rack and put the screws back in position. When moving or carrying the rack, try to be careful as the fol-
ding parts may clamp your fingers. Watch a video tutorial on how to change the rack by scanning following QR code.
Fig. 6
5.2 Removing the ball-bearing head
In order to replace or clean the ball-bearing head, you first need to remove the 4 screws on the side using the pro-
vided 2 mm allen key and then remove the cover-case (Fig. 7). To remove the ball-bearing head entirely, the head
fixation screw has to be pulled out as well using a 2 mm allen key (Fig. 8). Watch a video tutorial on how to change
the ball-bearing head by scanning following QR code.
Yo
ur P
ar
tn
er i
n A
g
ro
-D
ia
g
no
st
ic
s
Scan me
Scan me
Video: How to change the rack
for HOMEX 7
Video: How to remove the ball-
bearing head for HOMEX 7