34
2. LTD «Bioprom Company Kharkov» provides warranty for
AIR BIO PID
Controller
for the period of
18 months from the date of sale but not longer than 24 months from the
date of manufacture.
3. Warranty repair can be performed only by the company-manufacturer or it authorized
service centers.
4. Warranty repair is carried out within 3 working days from the date of receiving the
Controller by the service center; when submitting the damage certificate it is required to
add the description of a defect, accurate return address and contact phone; otherwise the
damage certificate will be reviewed within the longer time period, in certain cases the
repair period can be prolonged up to 14 days.
5.
Warranty is valid:
only on the territory of the country where the Controller was purchased;
on conditions that the Controller and the boiler have been operated properly in
strict compliance with manuals for the Controller and the boiler;
if the user has not incorporated (made) any changes into the Controller
configuration and construction;
if the works on putting the Controller into operation have been carried out by
the authorized representative of the manufacturing plant. The list of authorized
representatives of the manufacturing plant can be found on website of LTD «Bioprom
Company Kharkov» bioprom.ua.
6. Warranty
does not cover
damages occurred through:
user’s fault due to improper operation of the Controller and noncompliance
with operation rules described in the present Manual or Boiler Operation Manual;
loss of the delivery set contents mentioned in Item 1. INTRODUCTION;
willful damage;
repair (or attempt to repair) performed by an unauthorized individual;
power outages;
for the product that was installed and adjusted by a company or individual
that are non-authorized by the manufacturing plant;
natural disasters (lightning strike, fire, flood, submergence, etc.).
7. In case of revealing defects mentioned in item 6, repair is carried out at buyer’s
expense, and a buyer will be notified thereof prior to start of repair.
9 TRANSPORTATION
For the purpose of keeping (maintaining) the Controller integrity and proper
functionality during transportation one shall calibrate the unit, and follow all the
transportation conditions:
temperature and humidity (see Item 3 of this Manual);
stockpiling – not more than 10 ea.;
