17
To leave the fan adjustment window, move the cursor – frame to icon «Back»,
, and press the encoder button, the Controller will go back to menu «PID mode
settings».
3.3.4 Burner Cleanup Setting Up
To change time and periodicity of cleanup it is required to go to the menu
«Cleanup». By turning encoder select menu item «Cleanup»,
press the encoder
button – burner cleanup parameter window will open (Picture 13).
Picture 13 – Burner Cleanup Parameter Setup Window
Change of parameter value is similar to item 3.3.1.
Parameter value limits:
interval of cleanup switch on, portions:
1-99;
operation time, seconds:
1-99.
To leave the cleanup window, move the cursor – frame to icon «Back»,
, and
press the encoder button, the Controller will go back to menu «PID mode settings».
3.3.5 Start/Stop Mode Setting Up
Start/Stop mode is used for the controller operation with the preset capacity up
to achieving the setup temperature, after that there will be transition to ”Maintaining”
