9
●If the product is dropped, electric shocks can be caused due to the internal malfunction following the
impact from the dropping. The product needs to be taken to the sales shop or the main office in order
for you to request an inspection.
●The purification filter can be broken due to freezing if the product is used in a place where it is freezing
cold, requiring the product, if not used, to be stored in a place where the breaking due to freezing can be
prevented, but after the purification filter is removed first.
■If not followed, damage to the product or
risk to your safety can be caused.
■Install the acidic water hose lower than the
main case.
■If the hose is longer than necessary or higher
than the main case, the ion generation can be
affected, possibly leading to a change in
the taste of water.
1. Disconnect the water tap from the water pipe.
2. Rotating the angle stop adaptor into the water pipe. (Single-water tap)
3. Assemble the water tap back into the adaptor. (Single-water tap)
4. Install the standard compliant adaptor between the water pipe and the water branch pipe.
Then install the which needs to be connected to the water ionizer to the cold water pipe, while
connecting the balancing adaptor to the warm water pipe. (Water taps for cold and warm water)
5. Place the rubber gaskets between the water pipes, water tap, and adaptor, and should
apply the Teflon tape to the connection parts to assemble them.
6. Insert the inlet hose into the one-touch fitting installed to the adaptor and then fasten the safety pin.
7. Adjust the water pressure control screw of the adaptor to a appropriate level
(Alkaline water flow standard: 1.5 ± 0.5 ℓ/min)
Should use the standard inlet hose (1/4”) and fix the valve cover in the direction of the hose to
prevent the hose from being bent or the fastening nut from being loosened.
■ How to install
Caution
● Check whether the components to be installed at the water tap are appropriate.
● Should use the standard hose (1/4”), supplied by the company for the connection.
Use the one- touch adapter to fasten the hose before fixing the safety pin as illustrated in Page 3.
- If the standard hose is not used, damage due to water pressure can be caused, possibly leading
to water leakage
● Do not connect the product to a warm water pipe.
- Degradation of purification capacity and malfunctioning can be caused.
Balance maintenance
water pressure control screw
water pressure control screw
Hot water
side
Cold
water
side
1. Wall mounted water tap
reducer fitting
safety pins
safety pins
BTM-303D (영).indd 9
2016-08-31 오후 1:26:08
