BM1VOM-1.24
8
.EtCO2 97
BM1VET Operation Manual
-
Connecting the CAPNOSTAT® 5 CO2 Sensor to the Host System
1. Insert the CAPNOSTAT 5 CO
2
Sensor connector into the receptacle of the host monitor as shown
in Figure 1.
2. Make sure the arrows on the connector are at the top of the connector and line up the two keys of
the connector with the receptacle and insert.
3. To remove the connector, grasp the body portion of the connector back and remove.
Note
: Do not remove by pulling cable.
Shown below is the CAPNOSTAT 5 CO
2
Sensor connection to a Respironics Novametrix CO
2
adapter
Shown below is the CAPNOSTAT 5 CO
2
Sensor with a animal circuit:
