Operation and Care Manual
30
Connect the combination connector to the matching connector on the
front of the OnPoint
™
unit.
Note: These instructions are for basic usage of the OnPoint system. Refer to section 1.2 for the
“Indication for Use”
3.2.2 Power-Down Procedures
When you are finished using the OnPoint system, turn off the system in order
to conserve lamp life.
Always disconnect the OnPoint unit from its power source when performing
any kind of maintenance (e.g. cleaning, replacing fuses, etc.).
3.2.3 Single-use Endoscope Disposal
When disposing of the single-use endoscope and endoscope accessories,
follow procedures for biologically hazardous materials.
4.0 Cleaning and Maintenance
The following section describes the proper method(s) for cleaning and
maintaining your OnPoint system.
Note: Never immerse or soak any part of the OnPoint system in any liquid, as this can cause
significant damage not covered by the warranty.
4.1 General Cleaning of the OnPoint System
Use a lightly damp cloth. Wipe down the entire OnPoint unit with it.
Allow the unit to dry before using it again.
Any blood on the OnPoint unit can be removed using cotton or gauze
soaked in alcohol.