Operation and Care Manual
2
IMPORTANT
The OnPoint
™
1.2mm Scope System
is indicated to provide illumination
and visualization of anatomy in an interior cavity of the body through a
natural or surgical opening. This device is indicated for diagnostic and
operative arthroscopic and endoscopic procedures. The device is to be
used by a trained physician for the indicated uses only.
This manual describes the recommended procedures for preparing and
operating the OnPoint
System
. It does not describe how any medical
procedure is to be performed on a patient with this instrument.
Read all instructions in this manual carefully before using the OnPoint
1.2mm Scope System.
Carefully follow all safety instructions to prevent injury to the user or patient,
fire hazards, electrical shock, and damage to the device.
To maintain this device in optimal condition, follow all recommendations
in this manual for handling, cleaning, and storage.
Table of Contents
3.1.5.15 VGA Gamma Set Up
3.1.5.16 Print File Format
3.1.5.17 Capture Mode Set Up
3.1.5.18 Video Output Test
3.2 Basic Usage
3.2.1 Setup for Each Procedure
3.2.2 Power-Down Procedures
3.2.3 Single-use Endoscope Disposal
4.0 Cleaning and Maintenance
4.1 Cleaning of OnPoint
™
System
4.2 Sterilization of OnPoint
™
4.3 Lamp Life Monitoring and Replacement
4.4 Recommendations for the Disposal of the Device
4.5 Fuse Replacement
5.0 Troubleshooting
