3.1.4 Attaching Virtual Reality Glasses
1. To attach the iWear VR glasses, simply take the connector on the end of
the glasses and find the 6-pin connector on the back of the OnPoint
™
.
2. To disconnect the iWear VR glasses, pull the knurled ring on the glasses
connector directly away from the OnPoint unit. The ring will move and
the connector will disconnect.
Operation and Care Manual
3.1.5 Setting Up and Operating MediaCaptureUSB
The MediaCaptureUSB is a full-featured, fully integrated image-capture
system that is included with every OnPoint
™
system. MediaCaptureUSB is also
able to be activated from the sterile field via the camera connected to the
system. Your hand never has to leave the camera to capture what you
need.
Note: All functions that appear on the OnPoint display are also projected on any external display
(e.g. computer monitor, BioVision VR glasses, etc.).
3.1.5.1 Modes
The MediaCaptureUSB has three separate modes of operation:
1. Still Capture Mode – for capturing still images (“pictures”)
2. Video Capture Mode – for capturing video images (“movies”)
3. Image/Video Review Mode (or “Review Mode”) – for reviewing image
captures (available only if a CompactFlash
®
card is inserted in the
OnPoint
™
system’s media slot, and the card already contains captured
media).
There is a little red dot on the cable connector and the receptacle. When these are aligned, the
plug can be inserted into the receptacle.
iWear VR Glasses Connector
18
