7
Instrumentation Overview
(continued)
TISSUE PUNCHES
The Tissue Punches are used through the Master Tubes in the
surgical guide to remove soft tissue for flapless surgery. The
Tissue Punches are available in two diameters (4 and 5mm) and
one length and contain depth markings of (1), (2), (3) and the
top of the Tissue Punch (4) to correspond with the surgical plan
(protocols) for use during surgery.
The recommended drill speed is 300rpm.
STARTER DRILLS
The Starter Drills are used through the Master Tubes in the
surgical guide to perforate the cortical plate, create a 2mm pilot
and countersink the osteotomy. The Starter Drills are available in
five diameters (3.4, 3/4, 4, 4/5 and 5mm) to countersink different
implant collar shapes. These contain depth markings of (1), (2),
(3) and the top of the Starter Drill body (4) to correspond with
the surgical plan (protocols) for use during surgery.
The recommended drill speed is 1200 - 1500rpm.
DRILL POSITIONING HANDLES
The handles contain drill guide tubes that are placed within the
Master Tubes of the surgical guide to guide and stop the Twist
Drills at a specific predetermined depth for preparation of the
osteotomy. There are five handles [handles (1) and (2) for use
with 4mm Master Tubes and handles (3), (4) and (5) for use
with 5mm Master Tubes]. These contain drill guide tubes to
accommodate the various drill diameters (2, 2.75, 3, 3.25, 3.85
and 4.25mm).