55
6.5. Multi-Dispensing Mode (d)
(all models)
The pipette performs repetitive dispensings of a selected volume. During
this operation, the desires volume plus and automatically selected excess
volume is aspirated into the tip. The excess volume is needed to ensure
equal operating conditions for each dispensing.
1. Press
to display
.
2. Press
to con
fi
rm the mode change.
3. Press
or
until the multi-dispense volume is displayed.
4. Press
to con
fi
rm selection.
5. Press
or
until the desired number of aliquots is displayed.
6. Press
to con
fi
rm selection.
7. Position the tip to aspirate and press the START button.
The * sign and ARROW LEFT are lit to indicate the reset function.
8. Position the tip to discard priming excess and press the START button.
9. To dispense, position the tip, press the START button and repeat unti
the cycle is complete.
10. Finally, position the tip to discard any remaining excess and press the
START button twice.
Note:
Upon delivering the programmed volume, it is also possible to
continue to aspirate and dispense the same volume without the empty
function (excl. 710500). To continue, keep the START button pressed down
and within one second the direction of the arrow will change. Keeping the
button down, place the tip into the liquid again and the sample is aspirated
into the tip by releasing the START button.
Step 10.
Step 9.
Step 7.
Step 8.
