background image

66

12. WARRANTY INFORMATION

Biohit Proline Electronic pipettes are warranted for two years (except the 

battery) against defects in materials and workmanship. Should it fail to 

function in any period of time, please contact your local representative 

immediately.

ANY WARRANTY WILL, HOWEVER, BE DEEMED AS VOID IF FAULT 

IS FOUND TO HAVE BEEN CAUSED BY MALTREATMENT, MISUSE, 

UNAUTHORIZED MAINTENANCE OF SERVICE OR NEGLIGENCE 

OF INCORRECT STORAGE OR USE OF THE PRODUCTS FOR 

OPERATIONS OUTSIDE THEIR SPCIFIED LIMITATIONS, OUTSIDE 

THEIR SPECIFICATIONS, CONTRARY TO THE INSTRUCTIONS GIVEN 

IN THIS MANUAL OR WITH OTHER THAN THE MANUFACTURER’S 

ORIGINAL TIPS.

Each  Biohit  Proline  Electronic  pipette  is  tested  before  shipping  by  the 

manufacturer. The Quality Assurance Procedure is your guarantee that 

the Biohit Proline Electronic pipette you have purchased is ready for use. 

All Biohit Proline electronic pipettes and charging stands are CE-marked, 

ful

fi

 lling the requirements of the EN 55014, 1993/ EN 55104, 1995/ ISO 

13485: 2003 and IVD Directive (98/79/EC).

13.  RECYCLING INSTRUCTION (WEEE)

In compliance with European Directive, WEEE (2002/96EC) on 

waste and reducting of hazardous substances in electrical and 

electronic equipments, this device must not be recycled as 

unsorted municipal waste. Instead this device must be collected 

separately in accordance the local recycling regulations. The 

solid bar used in conjunction with the crossed-out wheeled bin 

indicates that the product was put on the European market after 

13 August 2005.

Summary of Contents for Proline 710010






























Reviews: