Biodom 27 d. o. o.
T: +386 8 205 10 86
OIC Hrpelje 4 a, 6240 Kozina
F: +386 5 662 67 57
www.biodom27.si
32
Furnace is in COOL FLUID phase (cooling down). This occurs when the water
temperature reaches a specific temperature with minimum power. The furnace
will automatically start when the water temperature cools down to its nominal
value.
Lack of pellets during combustion phase.
Ignition failed. Check the furnace status, clean the firebox and try to restart the
furnace.
Thermo-safety is active. Check the furnace status and manually reactivate the
safety, if there are no anomalies. Restart the furnace. If the problem persists,
contact our authorised service centre.
Safety presostat is active. Check the furnace status and manually reactivate the
safety, if there are no anomalies. Restart the furnace. If the problem persists,
contact our authorised service centre.
No signal from smoke gas detector. Call our authorised service centre.
No signal from firebox temperature. Call our authorised service centre.
No signal from flux sensor or the fans are functioning incorrectly. Call our
authorised service centre.
Furnace and/or chimney need cleaning.
No signal from water temperature. Call our authorised service centre.
Smoke gas temperature is too high.
COOL
FL UID
AL AR
PEL
AL AR
FIRE
AL AR
SEC
AL AR
PRES
AL AR
TC1
AL AR
TCh
AL AR
AIr
AL AR
d r t Y
AL AR
NTC
AL AR
GASS
