Biodom 27 d. o. o.
T: +386 8 205 10 86
OIC Hrpelje 4 a, 6240 Kozina
F: +386 5 662 67 57
www.biodom27.si
29
8.4
SETTING THE TIME PROGRAM
You can access the time program menu by pressing and holding the
MENU key
(until the display shows the
message TIMER).
The time program can be activated either by ON or OFF. It is necessary to set the exact time and day of the
week (Monday is 1, etc.) and set 6 time periods and temperature values.
Each time period is set with an initial (P1a – initial time for program 1) and end time (P1d – end time for
program 1). The furnace will maintain the set water temperature (P1t) during the set period.
Each day of the week offers up to 3 time periods.
Example (Tuesday): The upper display will show DAY2, the lower P1, P3 and P6. This means that the furnace will
be active on Tuesday within the time periods set with programs P1, P3 and P6.
Figure 20:
A diagram of the time program settings
DAY 1
DAY 7