5061-084-REV-1
LIGHTWAVE 3 & 3+ SPECTROPHOTOMETERS USER’S MANUAL
42
BUILT-IN PRINTER
Step 4
Lower the printer onto the locating bosses and
push down firmly.
Step 5
Invert the instrument and replace the accessory
cover screws at A and B.
Step 1
Lift off the printer cover using the tabs and discard
the spent roll.
Step 2
Open the platen lock, feed in the paper so that the
loose end is underneath the roll pointing towards the
front of the instrument, then close the platen lock and
draw the loose end through using the platen wheel.
Refilling the Printer Paper
