5061-084-REV-1
LIGHTWAVE 3 & 3+ SPECTROPHOTOMETERS USER’S MANUAL
15
USER INTERFACE
Step 3
Press the down arrow, enter up to 8-digits to define the
units that the measurements will be reported in.
OR
Open the Units option using the options key:
Select one of the predefined units; “µg/ml”, “µg/µl”,
“pmol/µl”, “mg/dl”, “mmol/l”, “µmol/l”, “g/l”, “mg/l”,
“µg/l”, “U/l”, “%”, “ppm”, “ppb”, or “conc”, using the
left and right arrow keys.
Press the down arrow, select the number of decimal
places to display the concentration in, “Auto”, “0”, “1”,
or “2”, using the left and right arrow keys.
Implement the changes and return to the parameters
screen by selecting “OK” using the confirm key.
OR
Reject the changes and return to the parameters
screen by selecting “Cancel” using the escape key.
Step 4
Press the down arrow, set the sample prompt, “Yes”
or “No”, to bring up the sample number option before
each measurement, using the left and right arrow keys.
Step 5
Proceed to the measurement screen by selecting “OK”
using the confirm key.
OR
“Return to the Applications screen by selecting
“Cancel” using the escape key.
