Installation
2
46
BinTec Access Networks GmbH
Proceed as follows:
➤
Have the communications module(s) ready for installation.
➤
Place the communications module onto the corresponding connector.
➤
Fix the communications module to the expansion card by fastening the Phil-
lips screws you received with X8E-2BC to fix the dummy front panels.
➤
For mounting the second communications module, proceed as described
earlier.
➤
If you do not want to use the second slot on the carrier card, mount the dum-
my front panel supplied with the X8E-2BC onto the unused slot.
➤
To install X8E-2BC, go to
chapter 2.4, page 48
.
2.3
Equipping the System Card
with the Smart Media Flash Card
Before installing the system card (X8A-SYS or X8A-SYS-VPN) into
X8500
, you
must equip the system card with the "internal" Smart Media Flash Card (SMFC).
The SMFC provides the operating system software BOSS for
X8500
. It is pos-
sible to install two SMFCs into X8A-SYS or X8A-SYS-VPN. One SMFC is locat-
ed on the system card and is only accessible if the system card is not installed.
The second SMFC slot is located on the front of the system card and is always
accessible. It can be installed optionally.
Installing the internal SMFC
If you want to equip X8A-SYS or X8A-SYS-VPN with the internal SMFC card,
perform the following steps.
➤
Take the SMFC out the antistatic bag.
Please note that if you do not want to use the second slot on the
carrier card, be sure to mount the dummy front panel supplied
with X8E-2BC onto the unused slot.
Summary of Contents for X5800
Page 4: ...4 BinTec Access Networks GmbH...
Page 34: ...34 BinTec Access Networks GmbH...
