Therefore, several types of configuration are available for each type of connection.
Note
To change the device configuration, you must log in with the user name
admin
. If you
do not know the password, you cannot make any configuration settings. This applies to
all types of configuration.
4.3.1 Express Setup Wizard for beginners
You have already learnt about configuration with the Express Setup Wizard in the Quick
Install Guide. It is used to perform the basic configuration of your device quickly and can
also be used if you can address the device with its preset IP configuration from your LAN.
This usually covers most standard configurations.
However, if you would like to make further settings, you can use the other configuration
methods mentioned above. You can first configure your device with the Express Setup
Wizard and subsequently extend or change this initial configuration with one of the other
tools. In many cases, configuration using the Express Setup Wizard alone will be suffi-
cient.
The Express Setup Wizard guides you through the configuration. Once you have exited
the Express Setup Wizard, your device is ready for use. The information you need for
configuration with the Express Setup Wizard and the prerequisites for this can be found in
the
on page 8, which is also available to you in printed form.
The detailed help system of the Express Setup Wizard will help you to clarify any ques-
tions you may have. As a result, a detailed description of the Express Setup Wizard is not
provided here.
4.3.2 Funkwerk Configuration Interface for advanced users
The Funkwerk Configuration Interface is a web-based graphic user surface that you can
use from any PC with an up-to-date web browser via an HTTP or HTTPS connection.
You can use the Funkwerk Configuration Interface to carry out all configuration tasks
easily. It is integrated in your device and is available in English. If required, other languages
can be downloaded from the download area of
and installed on
your device. To do this, proceed as described in
on page 354.
The settings you make with the Funkwerk Configuration Interface are applied with the
OK or Apply button of the menu, and you do not have to restart the device.
If you finish the configuration and want to save your settings so that they are loaded as the
Funkwerk Enterprise Communications GmbH
4 Access and Configuration
bintec R200 Series
59
