2.5.1.1 Gathering data
You can gather the main data for basic configuration with the Express Setup Wizard
quickly, as you do not require any information that needs in-depth network knowledge. If
necessary, you can use the example values.
Before you start the configuration, you should gather the data for the following purposes:
• Basic configuration (obligatory if your device is in the ex works state)
• Internet access (optional)
• Wireless LAN (optional, only for bintec R230aw and bintec R232bw)
• Company network connection (optional).
The following tables show examples of possible values for the necessary data. You can
enter your personal data in the "Your values" column, so that you can refer to these values
later when needed.
If you configure a new network, you can use the given example values for IP addresses
and netmasks. In cases of doubt, ask your system administrator.
Basic configuration
For a basic configuration of your gateway, you need information that relates to your net-
work environment:
Basic information
Access data
Example value
Your values
IP address of your gateway
192.168.0.254
Netmask of your gateway
255.255.255.0
Internet access
If you want to set up Internet access, you need an Internet Service Provider (ISP). You also
receive your personal access data from your ISP. The terms used for the required access
data may vary from provider to provider, but the type of information you need for dialling in
is basically the same.
The following table lists the access data that your device also needs for a DSL connection
to the Internet.
Data for Internet access
Access data
Example value
Your values
Provider name
GoInternet
2 Quick Install Guide
Funkwerk Enterprise Communications GmbH
14
bintec R200 Series
