Field
Description
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interfaces. Add new entries
with Add.
MAC Address
Enter a MAC address for the internal router interface of ATM
connection, e.g.
00:a0:f9:06:bf:03
. An entry is only re-
quired in special cases.
For Internet connections, it is sufficient to select the
Use Pre-
configured
option (default setting), in which case the MAC
address of
en1-0
is used.
DHCP MAC Address
Only if Address Mode =
DHCP
Enter the MAC address of the internal router interface of ATM
connection, e.g.
00:e1:f9:06:bf:03
.
If your provider has assigned you a MAC address for DHCP,
enter this here.
You can select the
Use Pre-configured
option (default set-
ting), in which case the MAC address of
en1-0
is used.
DHCP Hostname
Only for Address Mode =
DHCP
If necessary, enter the host name registered with the provider to
be used by your device for DHCP requests.
The maximum length of the entry is 45 characters.
Fields in the Settings for Routed Protocols over ATM menu (only shown for Type =
Routed Protocols over ATM)
Field
Description
IP Address/Netmask
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interface. Add new entries
with Add.
Prioritize TCP ACK
Packets
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is activated with
Enabled
.
Funkwerk Enterprise Communications GmbH
10 WAN
bintec R200 Series
211
