Chapter 2 Quick Install Guide
This chapter explains how you set up and start up your device and how you create a basic
configuration in just a few minutes using the Express Setup Wizard.
2.1 Introduction
Your bintec gateway contains extensive features for encrypted data transfer and Internet
access for both individual users and companies.
The basic configuration of your device is carried out using the Express Setup Wizard.
The way to obtain the basic configuration is explained below step-by-step. Detailed know-
ledge of networks is not necessary. A detailed online help system gives you extra support.
The Companion CD also supplied includes all the tools that you need for the configuration
and management of your device.
The BRICKware contains useful applications for managing your device.
2.2 System requirements
For configuration, your PC must meet the following system requirements:
• Windows 95, Windows 98, Windows ME or Windows NT 4.0 or Windows 2000 or Win-
dows XP.
(The instructions for testing/installing the TCP/IP protocol and setting up the PC apply to
Windows 2000 or Windows XP.)
• Installed network card (Ethernet)
• CD ROM drive
• Microsoft TCP/IP protocol installed (see
on page 17)
• High colour display (more than 256 colours) for correct representation of the graphics
2.3 Presettings
Preconfigured data
Your device is shipped with a pre-defined IP configuration:
2 Quick Install Guide
Funkwerk Enterprise Communications GmbH
8
bintec R200 Series
