Fig. 10:
Rack anchor bolts
3.3.1 Standalone
RM7000 can be placed as standalones on a flat, stable surface. The adhesive rubber feet must be stuck to the un-
derside panel to prevent the router from sliding.
Make sure there is enough space around the router (for ventilation purposes) and check that the power cord and
data cables can reach it.
3.3.2 Wall mounting
The RM7000 cannot be mounted on the wall.
3.4 Plug-in modules
Currently, only a 3G USB modem can be inserted in the device. To view the list of supported 3G modems, please go
to the following website: http://www.bintec-elmeg.com.
3.4.1 Installation
Simply insert the USB in the appropriate slot on the rear panel, as shown in the following figure:
Fig. 11:
USB modem insertion slot
3.4.2 Uninstall
To remove the device, simply pull it out from the slot where it was inserted. We recommend switching off the equip-
ment before removing the USB device.
bintec elmeg
3 Components and Power Supply
RM7000
11
Summary of Contents for RM7000
Page 5: ...I Related Documents bintec Dm748 I Software Updating bintec elmeg Related Documents RM7000 1 ...
Page 7: ...Fax 49 911 688 0725 Email support bintec elmeg com bintec elmeg 1 About this Guide RM7000 3 ...
Page 23: ...Fig 27 Inserting SD card bintec elmeg 3 Components and Power Supply RM7000 19 ...
