J
Eth WAN Base-T. WAN Gigabit Ethernet.
K
Eth WAN SFP.
L
WPS (Wireless Protected Setup). Not supported.
M
RST. Reset button. For further information on how the reset button works, please
see
on page 15
N
On/Off switch.
3.2 Expansion slots
The RM7000 has two expansion slots. This allows you to increase the features and interfaces by inserting different
cards or boards.
These slots are located on the router's front panel, as shown in the following figure:
Fig. 4:
Expansion slots
To correctly insert cards, please follow these steps:
(1)
Switch off the device and remove the data cables as described under section
on page 12.
(2)
Remove the device from the workplace and place it in a stable, safe location where it can be easily accessed
and handled.
(3)
Unscrew the front panel screws to remove the expansion card tray.
Fig. 5:
Unscrewing the front panel screws
(4)
Once unscrewed, pull the tray out of the front panel slot.
Fig. 6:
Extracting the tray from the front panel
3 Components and Power Supply
bintec elmeg
8
RM7000
Summary of Contents for RM7000
Page 5: ...I Related Documents bintec Dm748 I Software Updating bintec elmeg Related Documents RM7000 1 ...
Page 7: ...Fax 49 911 688 0725 Email support bintec elmeg com bintec elmeg 1 About this Guide RM7000 3 ...
Page 23: ...Fig 27 Inserting SD card bintec elmeg 3 Components and Power Supply RM7000 19 ...
