Binsfeld Engineering Inc. | 231-334-4383
www.binsfeld.com
869500-9_G Pg. 6
User Parameter Selection and Adjustment
The RX10K Receiver has seven user-configurable parameters.
The parameter name and value are shown on the lower line of the
display. Parameters are selected by scrolling through the
parameter menu using the
SELECT
◄►
(left and right) arrow
keys. The value of that parameter is adjusted using the
ADJUST
▲▼ (up and down) arrow keys. The parameter name is displayed
on the left side and the value on the right. A description of the
parameter screens and possible settings follow.
Channel
The Channel parameter allows the user to change the receiving
RF channel to match the RF channel of the TX10K-S. There are
16 RF channels. Appendix A contains a table listing the RF
channels and their corresponding frequencies. Along with the
channel selection value, a bar graph indicating the relative RF
signal strength being received is displayed. The more “=” units,
the better the signal strength (ten is maximum).
Input
The Input parameter allows the user to simulate certain inputs
from the TX10K-S. These can be used to check the operation and
settings of the RX10K, even without a transmitter. The possible
values are listed below:
Input
Description
Transmitter
The TX10K-S signal is the input (normal operating
mode)
+FS
Positive Full Scale input is simulated
Zero
Zero level signal input is simulated
-FS
Negative Full Scale input is simulated
+FS/2
Positive half scale input is simulated
-FS/2
Negative half scale input is simulated
+FS/4
Positive quarter scale input is simulated
-FS/4
Negative quarter scale input is simulated
+00328 -_
_
_
_
_
█
_
_
_
_
_+
R
x
C
h:
1
=
=
=
=
=
=
=
=
=
=
+00328 -_
_
_
_
_
█
_
_
_
_
_+
Input:
T
ransmitter