Binsfeld Engineering Inc. | 231-334-4383
www.binsfeld.com
869500-9_G Pg. 38
Appendix C: Error Codes
Error Displayed
Error Detected
Tx Signal UnderRange
The input signal to the TX10K-S
is less than the minimum level
Tx Signal OverRange
The input signal to the TX10K-S
is greater than the maximum level
Rx Signal UnderRange
The output signal of the RX10K is
less than the minimum level
Rx Signal OverRange
The output signal of the RX10K is
greater than the maximum level
Tx->Rx Data Error
The signal from the TX10K-S is
not being received properly by the
RX10K
NOTE: The output signals of the
RX10K will go to negative full
scale (-12000mV)
Tx Power Low Error
The power supply voltage level of
the TX10K-S is too low
Tx Power High Error
The power supply voltage level of
the TX10K-S is too high
Rx Power Low Error
The power supply voltage level of
the RX10K is too low
Rx Power High Error
The power supply voltage level of
the RX10K is too high