Binder 9010-0216, Operating Manual, Page: 23 / 61

FED / FED-UL (E2) 01/2022 page 23/60
5. Set the desired fan speed with the buttons
The fan speed can be set to a value between 0% and 100%.
Wait 2 seconds until the entered value is taken over (display flashing once).
6. Press button to return to normal display / actual value display (automatically after approx. 30
seconds).
Adjust the temperature safety device following any changes of the set-point (chap. 7).
6.3 Time functions: Continuous operation and Timer operation
Press the time management button .
The timer indicates its current time function. There are two possible time functions:
Continuous operation
The display shows alternately “ t1 ” (time function) and the time function “Continuous operation” “ t inf ”:
The heating is permanently active, independent of the timer setting.
Timer operation
The display shows alternately “ t1 ” (time function) and the running-down time or “ tOff ”:
or
Remaining time (example: 28 Min.) – Timer running
down
Heating activity depending on the entered time value and
the timer function selected in the user menu (chap.6.4.4)
Timer not programmed or run-down “t off”
If the timer has run-down, the chamber’s behavior depends
on the pre-selected timer function (chap. 6.4.4).
Press button to return to normal display (actual value display) (automatically after approx. 30
seconds).