Make sure to hold the earpiece correctly over your ear.
Adjust the volume as described in Section 5.
You need to
subscribe
to Caller Display from your service
provider. Contact the service provider for details of how to
subscribe.
The caller may have
withheld
his number by dialing 141.
Or he may be calling from a network that does not trans-
mit the Caller Display (ex., it may be an international call).
Check if your Handset is linked with the Base unit. If not,
you need to re-register the Handset.
If the display says
BS SEARCH
BS SEARCH
BS SEARCH
BS SEARCH
BS SEARCH
, make sure the mains
power lead is plugged into the back of the Base unit,
and
the adapter is plugged into the mains socket with the
power switched on.
38
Troubleshooting continue...
Move the Handset
closer
to the Base unit before you try
again to make a call.
Move the Handset
closer
to the Base unit, or to a
different position.
Try moving the Base unit so that it’s
not near other
electrical equipment
, such as a TV or a computer.
If you are using a
routing box
(
smart socket)
, try
disconnecting it then making a call. If the sound is OK
without the routing box, that’s the cause of the problem.
You’ll get the best results if you site the Base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place for the base unit.
The strange noise is caused by interference. Disconnect
the mains power lead from the back of the Base unit,
then wait for 30 seconds before reconnecting it.
“My call was cut off
when I went out of
range. Now I can’t
use my handset.”
“There is interference,
noise or echoing on
the line.”
“When I press the
PHONE or SPEAKER-
PHONE button, I hear
a loud noise.”
“The volume in the
earpiece is low.”
“The Caller Display
feature isn’t
working.”
