Handset Power
To turn the Handset power to Off:
On/Off
Press and hold POWER/OK button for 3 seconds.
Ö
The LCD screen will turn blank.
To turn the Handset power to On:
1
Press POWER/OK button.
Ö
The LCD screen will show,
»
INITIALIZE
INITIALIZE
INITIALIZE
INITIALIZE
INITIALIZE
then
shows the standby display.
2
Place the Handset face up on the Base unit
charge cradle.
1
In Standby mode, press and hold RING button for
3 seconds.
Ö
The LCD screen will display
»
RING OFF
RING OFF
RING OFF
RING OFF
RING OFF
and
the
icon will turn on. The ring volume will
be set to
VOLUME 0
.
2
To restore the ring function, press and hold RING
button again for 3 seconds.
Ö
The LCD screen will display
»
RING ON
RING ON
RING ON
RING ON
RING ON
and
the
icon will turn off.
Keypad lock
When the keypad is locked, no numbered keys can be
pressed so you can’t make calls by mistake. While keypad
is locked, the
an emergency call and answering an incoming call.
1
Press and hold KEYPAD LOCK button for 3 secs.,
the
icon will turn on.
Ö
When pressing any button except
OK
button, the
LCD screen will display
»
PRESS OK +
PRESS OK +
PRESS OK +
PRESS OK +
PRESS OK
2
To unlock, press OK and then press */RING button.
Ö
The
icon will disappear on the LCD screen.
This feature is useful if you don’t remember where
you put your Handset(s).
1
Press PAGE button on the Base unit.
Ö
The Handset(s) registered to the Base unit emits
a paging tone for 60 seconds. The LCD screen will
show,
»
PAGING
PAGING
PAGING
PAGING
PAGING
2
Press any button on the Handset or press PAGE
button on the Base unit to terminate the paging call.
Basic Telephone operation continue...
Ring On/Off
shortcut
feature
Paging the
Handset(s
*
SKRQHLVVWLOOFDSDEOHRIPDNLQJ
9
MENU
MENU
MENU
