Switching on and off
To switch the
handset on
and off
To switch the handset off (in case you need to
save battery power):
◗
Press the
HANG UP
button and hold it for
u
The display goes blank.
To switch the handset back on:
◗
HANG UP
button
u
for a moment before going to idle
Notes
■
When the handset is switched off, it can’t be used for
making calls,
including emergency calls
.
■
When the handset is switched off, it won’t ring for
incoming calls, but the base unit will still ring. To
answer a call when the handset is switched off, you
need to switch it back on. Remember that it may take a
few moments for the handset to re-establish a radio link
with the base unit.
■
If the batteries have become completely run down (or if
the handset is switched off) and you place the handset
in the charging cradle, it may take about 5 minutes to
link with the base unit. If you lift the handset during this
time, it will try to link to the base unit.
!
Make sure mains power to the base unit stays
switched on. The Symphony
power for normal operation; not just for charging
the batteries.
Ringer
melodies and
volumes
For details of how to change these, refer to the
‘ ’ functions in the Handset and Base Settings
5 and
).
11
2 seconds
The handset plays music, then display shows
Searching
mode.
menus (pages
Ring Setup
Binatone Help Line:
0845 345 9677
(Local Call rate)
2
54
2610 needs electrical
Press and hold the
