Switch off power
at the mains socket, wait for a few
seconds and then
switch back on
. This may solve the
problem.
“I cannot make
a call.”
The handset’s keypad may be
locked
(see page
Unlock it before you make a call.
Only one handset (or the base unit) can be connected
to the outside line at once. If another handset is already
using the line, you need to wait until it’s finished its call.
Call block
page
“When I press
keys, nothing
happens.”
Make sure the
batteries
are fitted in your handset. If
the Battery Level symbol on the display shows ‘low’,
recharge the batteries.
“When I key in a
number, it
appears on the
display, but I
can’t make an
outside call.”
Try moving the handset
closer
to the base unit.
Try a
different position
for the base unit — somewhere
higher if possible, or further from other electrical
equipment.
Call block
page
“The phone
does not ring”
Check that the base unit’s
mains power
adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the
telephone line cable
that
was supplied with your Symphony 2610. Other
telephone line cables might not work.
Check that the
total REN value
of all equipment con-
nected to your telephone line is no more than 4 (see
page 2). Disconnect one or more telephones and see
whether that helps.
Troubleshooting
Binatone Help Line:
0845 345 9677
(Local Call rate)
57
10).
53).
may have been set and turned on (see
may have been set and turned on (see
53).
