Handset registration
!
You don’t need to register any handsets which were
supplied as part of the system with your base unit —
they are already registered. But if you’ve bought any
extra handsets separately, you’ll need to register them.
To check whether a handset is already registered,
make
sure mains power to the base unit is switched on
and the handset is within range
. The handset’s display
should show its name
(default
) and number.
If the display constantly shows
, you
need to register the handset.
Each handset can be registered to
up to four base
units
, which have numbers 1 to 4.
To re-register
or to register a
new handset
1
On the base unit, press and hold the
HANDSET LOCATOR
button until you hear
Registration tone (repeated ‘beeps’)
You now have
60 seconds
to register the
handset.
2
On the handset, press the left Soft button
Menu
, then press the
or
button to scroll
to
3
Press the left Soft button
u
The display shows a list of base units. If any
of these numbers with special color, the handset
is already registered to that base unit.
Move the highlight to
Base
u
The display shows
PIN:
Key in the base unit’s PIN code (default 0000)
If the base unit’s PIN code has been changed
from 0000 (see page
), you’ll need to know
the current PIN code.
28
Searching
Register
Select
Select
4
5
http://www.binatoneonline.com/
55
continued overleaf …
Binatone
(number) then
press the left Soft button
