Troubleshooting
!
The Symphony 2610 must be serviced by trained
engineers. NEVER attempt any repairs or adjustments
yourself — you could make the problem worse and
invalidate the Guarantee.
ALWAYS check
first that:
■
you have followed all the steps listed on pages to
to install and set up your Symphony 2610
■
all
connectors
are firmly inserted in their sockets
■
mains power
to the base unit is switched on at the
socket
■
the handset’s
batteries
are correctly and securely
installed, and are not run down
Everyday use
“I cannot make
or answer calls.”
If the handset’s display is blank, it may be
switched off
.
Press the
HANG UP
button to switch it back on.
Check that the base unit’s
mains power adapter
is
plugged in and
power is switched on
. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the
telephone line cable
supplied with your Symphony 2610. Other telephone
line cables might not work.
Move the handset
closer
to the base unit.
Check the
Battery Level
symbol on the display. If it is
low, replace the handset on the base unit or charger
pod to recharge the batteries.
http://www.binatoneonline.com/
56
3 7
