NAVIGATION
36
9.2 Waypoints
You can add up to two additional destinations
before you begin navigating, these additional
destinations are know as waypoints. When the
unit calculates the route it will navigate you to
each waypoint first before continuing on to
your final destination. This is handy if you are
planning a trip were you would like to stop off
on the way to take in sights or simple just for a
break/fuel.
To add waypoints tap
, you will be taken to the Search Menu screen. You can then enter
your waypoint in the same way that you did for your destination (see page 34).
To remove a waypoint/destination, select the desired location so that it is highlighted blue and then
tap
. The waypoint/destination will be removed from the list.
Navigating using waypoints
When the unit calculates the route it will calculate the route from your current position to the
location at the top of the list first, it will then calculate the route from the location at the top of the
list to the location second from top and so on for the next location. The last location on the list will
always be your final destination. You can change the order of a location by selecting it so that it is
highlighted blue, then use the
and
keys to move it up or down in the list. Once you have
entered all your waypoints and they are in the correct order tap
, the unit will calculate the
route and change to the route navigation screen.
