7
Fit the rechargeable batteries in each handset
6
7
A
+
–
. Fit the three
batteries as
shown, making
sure you match
the
and
ends
to the markings
in the battery
compartment
B
. Fit the
battery
compartment
cover, sliding it
into place and
pressing firmly
to make sure it
is secure
Charge the batteries for 15 hours
The battery charge level symbol should increase
by one bar every half hour when you’re charging
an empty battery. If you think that the symbol
isn’t showing the correct battery charge level,
remove and refit the batteries.
Before you use the handset for
the first time, it’s important to
charge the batteries fully.
The handset ‘beeps’ when it’s
correctly in position on the
charging cradle.
Leave the handset on the charging cradle
for 15 hours.
The battery
level symbol
blinks
Make sure the mains socket is
switched on if you want to use
the phone — it will not work
without electrical power
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
8
Use the plug to
raise the shutter
before pushing
it into the socket
NOTE: the charger pod does not have
a connection to the telephone line.
DON’T use non-rechargeable batteries in the handset.
The Charge
light comes on.
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:16
Color profile: Generic CMYK printer profile
Composite Default screen
All manuals and user guides at all-guides.com
